Roofing

Blackhawk 5000 AND 5100 SERIES: Asphalt cutback blends. These blends can be provided with different base asphalts and solvents types. These cutbacks can be used as blending bases for roofing products and specialty coatings.

Blackhawk 5130: 24 oz. aerosol can utilized for priming roofing substrate, corrosion resistance and various other priming/coating possibilities.

Blackhawk 5300: High solid, non-oxidized, low VOC cold adhesive product. It is universally VOC compliant as a roofing cold adhesive. Used in lieu of hot asphalt or torching in commercial roofing applications.

Blackhawk 5310/20/30 and 40: High solid, non-oxidized, low VOC cold adhesive product with a unique polymer modifier. Four polymer-modified grades are available depending on use. Used in lieu of hot asphalt or torching in commercial roofing applications.

Blackhawk 5321: High solid, non-oxidized, low VOC rigid board insulation adhesive with a unique polymer modifier. Typical uses include commercial roofing insulation adhesive.

Blackhawk 5331: High solid, non-oxidized, low VOC cold adhesive with a unique polymer modifier and clay stabilizer. Used in lieu of hot asphalt or torching in commercial roofing applications.

Blackhawk 5400: High solids, non oxidized, low VOC trowel grade product. Typical uses include commercial roofing, flashing cement, below grade waterproofing and precast joint sealant. Typically used as a summer grade material.

Blackhawk 5410: High solids, non oxidized, low VOC trowel grade product. Typical uses include commercial roofing, flashing cement, below grade waterproofing and precast joint sealant. Typically used as a winter grade material.

Blackhawk 5420: High solids, non oxidized, low VOC trowel grade product. Enhanced with a unique polymer concentration for added strength in cured form. Typical uses include commercial roofing, flashing cement, below grade waterproofing and precast joint sealant.

Blackhawk 5500: Utilizes select oxidized base asphalt. This blend produces > 350 g/l of VOC's. The enhanced asphalt typically yields higher uplift resistance in testing. Typically used in lieu of hot asphalt or torching in commercial roofing applications.

Blackhawk 5510: Utilizes select oxidized base asphalt and is suitable for spray, roller or brush application. BH 5510 is slightly higher in viscosity than BH5500. This blend produces 350 g/l of VOC 's.

Blackhawk 5511: Utilizes carefully selected oxidized base asphalt and an aromatic solvent. Suitable for spray or squeegee application. Universally VOC compliant as a cold process commercial roofing adhesive.

Blackhawk 5600: Oxidized, trowel grade cement. Typical uses include commercial roofing, flashing cement, corrosion protection on pipelines and as a vapor barrier material.

Blackhawk 5700: Two-part elastomeric product. Urethane-modified asphalt used as pourable expansion joint material and commercial roofing insulation adhesive. Low VOC.

Blackhawk 5710: Two-part elastomeric product. Urethane-modified asphalt used as a trowel grade material for waterproofing and corrosion protection.

Blackhawk 5720: Two-part elastomeric product. Urethane-modified asphalt used as a spray grade material for below grade waterproofing, corrosion protection and as a commercial roofing product.

Blackhawk 5800: Polymer-modified hot melt product. Provided in brick form, 5-gallon pails and 55-gallon drums. BH 5800 has various adhesion and sealing capabilities.

Blackhawk 5810: Pressure-sensitive, polymer-modified tape form and round DOT shape products. Has multiple self-adhering uses for adhering and sealing substrates together.

Blackhawk 5820 Series: Extruded butyl rubber sealants. Various sizes available with numerous sealing capabilities.

Blackhawk 5900: Shingle sealant strip modifier. Packaged in totes, drums or pails, this product has a unique ambient temperature, 100% solids pourable consistency.

Blackhawk 5920/30/40/50: Shingle sealant strip modifier. Packaged in 50 lb bricks and 55-gallon drums. There are various grades depending on customer requirements.

Water / Wastewater

Blackhawk 5000 AND 5100 SERIES: Asphalt cutback blends. These blends can be provided with different base asphalts and solvents types. These cutbacks can be used as blending bases and specialty coatings and rust preventatives.

Blackhawk 5130: 24 oz. aerosol can utilized for corrosion resistance and various other priming/coating situations.

Blackhawk 5500: Utilizes select oxidized base asphalt. BH 5500 is of spray consistency with light fiber loading, but can also be applied with roller or brush.

Blackhawk 5510: Utilizes select oxidized base asphalt and is suitable for spray, roller or brush application. BH 5510 is slightly higher in viscosity than BH5500.

Blackhawk 5600: Oxidized, trowel grade cement. Typical uses include corrosion protection on pipelines and as a vapor barrier material.

Blackhawk 5700: Two-part elastomeric product. Urethane-modified asphalt used as pourable expansion joint material and as a waterproofing liquid applied membrane. Low VOC.

Blackhawk 5710: Two-part elastomeric product. Urethane-modified asphalt used as a trowel grade material for waterproofing and corrosion protection.

Blackhawk 5720: Two-part elastomeric product. Urethane-modified asphalt used as a spray grade material for below grade waterproofing and corrosion protection.

Blackhawk 5800: Polymer-modified hot melt product. Provided in brick form, 5-gallon pails and 55-gallon drums. BH 5800 has various adhesion and sealing capabilities.

Blackhawk 5810: Pressure-sensitive, polymer-modified tape form and round DOT shape products. Has multiple self-adhering uses for adhering and sealing.

BCM

Blackhawk 5000 AND 5100 SERIES: Asphalt cutback blends. These blends can be provided with different base asphalts and solvents types. These cutbacks can be used as blending bases for roofing products, pavement sealers, specialty coatings and rust preventatives.

Blackhawk 5130: 24 oz. aerosol can utilized for priming roofing substrate, corrosion resistance and various other priming/coating possibilities.

Blackhawk 5500: Utilizes select oxidized base asphalt. A solvent-based asphalt blend intended for spray application.

Blackhawk 5510: Utilizes select oxidized base asphalt and is suitable for spray, roller or brush application. BH 5510 is slightly higher in viscosity than BH5500.

Blackhawk 5600: Oxidized, trowel grade cement. Typical uses can include vapor barrier material.

Blackhawk 5710: Two-part elastomeric product. Urethane-modified asphalt used as a trowel grade material for waterproofing and corrosion protection.

Blackhawk 5720: Two-part elastomeric product. Urethane-modified asphalt used as a spray grade material for below grade waterproofing, corrosion protection and as a commercial roofing product.

Blackhawk 5810: Pressure-sensitive, polymer-modified tape form and round DOT shape products. Has multiple self-adhering uses for adhering and sealing.

Blackhawk 5820 Series: Extruded butyl rubber sealants. Various sizes available for a host of sealing opportunities.

High Temp

Blackhawk 5000 AND 5100 SERIES: Asphalt cutback blends. These blends can be provided with different base asphalts and solvents types.

Blackhawk 5130: 24 oz. aerosol can utilizing special blend base asphalt that when spray applied, provides a smooth, uniform and quick drying primer/coating for various uses.

Blackhawk 5500: Utilizes select oxidized base asphalt. Lightly modified with a select fiber and is intended for spray application.

Blackhawk 5510: Utilizes select oxidized base asphalt and is suitable for spray, roller or brush application. BH 5510 is slightly higher in viscosity than BH5500.

Blackhawk 5600: Oxidized, single component, trowel grade cement. Smooth and light trowel consistency for easy hand-applied application.

Blackhawk 5700: Two-part elastomeric product. Urethane-modified asphalt used as pourable expansion joint material, insulation adhesive and as a waterproofing liquid applied membrane. Low VOC.

Blackhawk 5710: Two-part elastomeric product. Urethane-modified asphalt used as a trowel grade material for waterproofing and corrosion protection with high temperature resistance.

Blackhawk 5720: Two-part elastomeric product. Urethane-modified asphalt used as a spray grade material for below grade waterproofing and corrosion protection with high temperature resistance.

Transportation

Blackhawk 5000 AND 5100 SERIES: Asphalt cutback blends. These blends can be provided with different base asphalts and solvents types.

Blackhawk 5130: 24 oz. aerosol can utilized as a small, convenient underbody coating product.

Blackhawk 5200: Low VOC solvent-based asphaltic non-fibered gel consistency product containing selected mineral fillers that can be brushed or spray applied in a medium film build as an underbody coating.

Petrochemical

Blackhawk 5000 AND 5100 SERIES: Asphalt cutback blends. These blends can be provided with different base asphalts and solvents types.

Blackhawk 5130: 24 oz. aerosol can utilized for corrosion resistance and various other priming/coating possibilities.

Blackhawk 5500: Utilizes select oxidized base asphalt and is suitable for spray, roller or brush application. Lightly fiber modified.

Blackhawk 5510: Utilizes select oxidized base asphalt and is suitable for spray, roller or brush application. BH 5510 is slightly higher in viscosity than BH5500.

Blackhawk 5600: Oxidized, trowel grade cement. Typical uses include commercial roofing, flashing cement, corrosion protection on pipelines and as a vapor barrier material.

Blackhawk 5700: Two-part elastomeric product. Urethane-modified asphalt. Of pourable, self-leveling consistency.

Blackhawk 5710: Two-part elastomeric product. Urethane-modified asphalt used as a trowel grade material for waterproofing, corrosion protection and high temperature resistance.

Blackhawk 5720: Two-part elastomeric product. Urethane-modified asphalt used as a spray grade material for below grade waterproofing and corrosion protection.