Roofing

NOVOTAC a highly effective water based non-asphaltic primer for self adhered membranes that can be applied to masonry, gypsum board, concrete, wood, and metal.

Water / Wastewater

SC1100 a 100% solids low viscosity epoxy primer designed to deeply penetrate and seal all concrete substrates prior to topcoat application of epoxy. This primer virtually eliminates out-gassing which is common when applying an epoxy on concrete surfaces.

SP2000W a 100% solids, no VOC hybrid Novolac epoxy alternative to coal tar epoxy engineered for aqueous service including potable water, waste/sewer water and salt water applications. Has excellent bonding to damp to wet substrates and will cure under water.

SP2000R a rubber filled version of the SP-2000W designed for immersion service with added flexibility and impact resistance. Typical use: cooling tower basins, gray water tanks, fountains etc. Has excellent bonding to damp to wet substrates and will cure under water.

SC3300 a 100% solids Novolac epoxy designed for long term chemical immersion service. This product offers excellent chemical resistance for numerous chemicals including up to 98% sulfuric acid.

SC5400 a 100% solids ceramic filled Novolac epoxy engineered for elevated temperature, excellent chemical and abrasion resistant.

ER100 a 100% solids flexibilized epoxy that is a trowelable paste designed for vertical expansion joints (concrete and/or metallic) including joints in cooling tower basins requiring chemical resistance.

ER2000 a 100% solids flexibilized epoxy that is pourable for expansion joints requiring chemical resistance.

SL100 a 100% solids polymer cement for the rebuilding and repair of concrete structures in the waste water environment such as man-holes and wet wells .

NOVOLITE a 100% solids polymer cement that has been designed for vertical and overhead repairs on concrete structures. NOVOLITE will hang on vertical surface up to 4 inches thick with NO slump and weighs only 4 pounds per gallon.

BCM

TFLOOR a 100% solids polymer cement engineered for horizontal concrete repair.

SC1100 a 100% solids low viscosity epoxy primer designed to deeply penetrate and seal all concrete substrates prior to topcoat application of epoxy. This primer virtually eliminates out-gassing which is common when applying an epoxy on concrete surfaces.

SP2000W a 100% solids, no VOC hybrid Novolac epoxy alternative to coal tar epoxy engineered for aqueous service including potable water, waste/sewer water and water run off catch basins. Has excellent bonding to damp to wet substrates and will cure under water.

SP2000R a rubber filled version of the SP-2000W designed for immersion service with added flexibility and impact resistance. Typical use: cooling tower basins, floor coating, fountains etc. Has excellent bonding to damp to wet substrates and will cure under water.

SC3300 a 100% solids Novolac epoxy designed for long term chemical immersion service. This product offers excellent chemical resistance for numerous chemicals including up to 98% sulfuric acid.

ER100 a 100% solids flexibilized epoxy that is a trowelable paste designed for vertical expansion joints (concrete and/or metallic) including joints in cooling tower basins requiring chemical resistance.

ER2000 a 100% solids flexibilized epoxy that is pourable for expansion joints requiring chemical resistance.

TFLOOR a 100% solids polymer cement engineered for horizontal concrete repair. (curbs, sidewalks, fountain basins, steps, etc)

NOVOLITE a 100% solids polymer cement that has been designed for vertical and overhead repairs on concrete structures. NOVOLITE will hang on vertical surface up to 4? with NO slump, weighs only 4 pounds per gallon and is extremely tough.

High Temp

SC3406 a specialized Novolac epoxy coating designed to withstand multiple, rapid temperature changes. Excellent for pipelines and compressor station applications.

SC5400 a 100% solids ceramic filled Novolac epoxy engineered for elevated temperature, excellent chemical and abrasion resistant. Petroleum tank linings, pressure vessels, heat exchangers and refinery piping and valves are typical uses.

EC150 a high strength Novolac epoxy structural adhesive with temperature resistance to 450 degree F which is designed for bonding ceramic tiles to substrates.

Marine

SP2000W a 100% solids NO VOC hybrid Novolac epoxy alternative to coal tar epoxy. This coating is used for potable water tanks, gray water tanks, saltwater corrosion protection and general maintenance around marine structures, pilings, barges, boats and ships. Has excellent bonding to damp to wet substrates and will cure under water.

SP2000R a rubber filled version of the SP-2000W designed for immersion service with added flexibility and impact resistance. Typical use: gray water tanks. Has excellent bonding to damp to wet substrates and will cure under water.

SP2000M a ceramic filled version of the SP-2000W designed for added abrasion resistant applications.

NONSKID coating system to add texture and slip resistance where needed.

Petrochemical

SC1100 a 100% solids low viscosity epoxy primer designed to deeply penetrate and seal all concrete substrates prior to topcoat application of epoxy. This primer virtually eliminates out-gassing which is common when applying an epoxy on concrete surfaces.

SP2000W a 100% solids, no VOC hybrid Novolac epoxy alternative to coal tar epoxy engineered for aqueous service including potable water, waste/sewer water and water run off catch basins. Has excellent bonding to damp to wet substrates and will cure under water.

SP2000R a rubber filled version of the SP-2000W designed for immersion service with added flexibility and impact resistance. Typical use: cooling tower basins, floor coating, fountains etc. Has excellent bonding to damp to wet substrates and will cure under water.

SC3300 a 100% solids Novolac epoxy designed for long term chemical immersion service. This product offers excellent chemical resistance for numerous chemicals including up to 98% sulfuric acid.

SC5400 a 100% solids ceramic filled Novolac epoxy engineered for elevated temperature, excellent chemical and abrasion resistant. Petroleum tank linings, pressure vessels, heat exchangers, refinery piping and valves are typical uses.

R200 a 100% solids Novolac epoxy spray applied using heated plural component equipment. High build coating that cures rapidly even at cold temperatures. Yields a glass-like finish.

ER100 a 100% solids flexibilized epoxy that is a trowelable paste designed for vertical expansion joints (concrete and/or metallic) including joints in cooling tower basins requiring chemical resistance.

ER2000 a 100% solids flexibilized epoxy that is pourable for expansion joints requiring chemical resistance.

SL100 a 100% solids polymer cement for the rebuilding and repair of concrete structures in the waste water environment such as man-holes and wet wells .

TFLOOR a 100% solids polymer cement engineered for horizontal concrete repair.

NOVOLITE a 100% solids polymer cement that has been designed for vertical and overhead repairs on concrete structures. NOVOLITE will hang on vertical surface up to 4? with NO slump and weighs only 4 pounds per gallon.